During normal driving, please avoid unnecessary clutch operation. Under typical driving conditions, the clutch of the ISUZU Concrete Mixer Truck should remain fully engaged and should not slip. Do not step on the clutch pedal or place your foot on it, except when starting the vehicle, shifting gears, or braking at low speeds. Long term placement of feet on the clutch pedal can cause the clutch to slip, friction plates to wear out, and in severe cases, even damage the pressure plate, flywheel, or cause the clutch spring to anneal. This type of operation not only increases the risk of mechanical failure, but also leads to increased fuel consumption and rising operating costs.
The correct starting technique should follow the principle of "quick lifting, slow engagement, and smooth connection". When lifting the clutch pedal, quickly lift it first. When the engine sound changes, indicating that the clutch is in a semi engaged state, the lifting speed should be slowed down. Then, gradually release the pedal completely, while smoothly controlling the throttle according to the engine load to ensure a smooth start.
When shifting gears, the clutch should be quickly and decisively pressed and released, and should not be in a semi engaged state for a long time, otherwise it will accelerate wear and tear. Coordination with the accelerator pedal is also crucial. To further ensure smooth gear shifting and minimize wear on the gearbox and clutch, it is recommended to use the "dual clutch shifting method". Although this technique requires more practice, it can improve fuel efficiency and reduce long-term maintenance costs, making it a worthwhile practice for economical and environmentally friendly driving.
